{"markdown":"---\ntitle: \"Architectural Glass Manufacturing Technology | AMG Glass\"\ncanonical_url: \"https://amartaglass.com/technology\"\nlast_updated: \"2026-10-14T08:24:18.599Z\"\nmeta:\n  description: \"AMG processes architectural glass on automated CNC cutting, high-convection tempering, and clean-room lamination lines, holding panels to a ±1.0 mm tolerance under SNI certification.\"\n  \"og:description\": \"AMG processes architectural glass on automated CNC cutting, high-convection tempering, and clean-room lamination lines, holding panels to a ±1.0 mm tolerance under SNI certification.\"\n  \"og:title\": \"Architectural Glass Manufacturing Technology\"\n---\n\nSkip to content\n\n**Manufacturing technology**\n\n# **From jumbo sheet to installed glass, on automated lines**\n\nAMG processes tempered, laminated, and insulating glass on automated cutting, high-convection tempering, and clean-room lamination lines. Every panel passes surface-stress, fragmentation, and dimensional checks before it leaves the plant.\n\n- **SNI certified**\n- **Aligned with AS/NZS & ISO**\n- **3 production facilities**\n- **Exports to 17 countries**\n\n**Production stages**\n\n## **How AMG processes architectural glass**\n\n**01**\n\n### **CNC Cutting & Edge Processing**\n\nJumbo sheets are cut on automated lines with nesting software that keeps offcuts low. Edges are ground, drilled, and notched to the working drawings before any panel enters the furnace, so tolerances are locked in early.\n\n**02**\n\n### **Thermal Toughening**\n\nHigh-convection furnaces heat glass evenly and quench it under controlled pressure. The result is tempered panels with consistent surface stress, low optical distortion, and several times the strength of annealed glass.\n\n**03**\n\n### **Lamination Assembly**\n\nPVB, SGP, and EVA interlayers are assembled in a clean room and cured in an autoclave. The process bonds glass and interlayer into one panel that holds together when broken.\n\n**04**\n\n### **Insulating Glass Units (IGU)**\n\nDual-seal lines assemble two panes around a desiccant-filled spacer, then fill the cavity with argon to slow heat transfer through the facade.\n\n**Quality assurance**\n\n## **Every panel is tested before it ships**\n\nQuality control runs on measured data, not visual checks alone. Surface stress, optical distortion, fragmentation, and edge stress are recorded for each batch against SNI standards and project specifications.\n\n**< 0.08mm**\n\nOptical distortion limit\n\n**± 1.0mm**\n\nDimensional tolerance\n\n**100%**\n\nFragmentation test pass rate\n\n**Grade A**\n\nEdge stress consistency\n\n**FAQ**\n\n## **Questions project teams ask about our processing**\n\n<details>\n\n<summary>**What standards does AMG glass comply with? **</summary>\n\n\n\nAll AMG products are certified to Indonesian SNI standards, and many product lines also align with AS/NZS and ISO requirements for architectural glazing.\n\n</details>\n\n<details>\n\n<summary>**Which interlayers are available for laminated glass? **</summary>\n\n\n\nAMG laminates with PVB, SGP, and EVA interlayers in a clean-room environment. Autoclave curing bonds the layers into a single panel that holds together when broken.\n\n</details>\n\n<details>\n\n<summary>**What tolerances does AMG hold during production? **</summary>\n\n\n\nProduction is controlled to a dimensional tolerance of ±1.0 mm and an optical distortion limit below 0.08 mm, with fragmentation tests on every batch.\n\n</details>\n\n<details>\n\n<summary>**Does AMG produce insulated (double) glass units? **</summary>\n\n\n\nYes. Insulating glass units are assembled on automated dual-seal lines with argon gas filling and desiccant spacers to improve thermal performance.\n\n</details>\n\n<details>\n\n<summary>**Where does AMG deliver? **</summary>\n\n\n\nAMG delivers nationwide across Indonesia and exports to 17 countries, with packing designed for long-distance transport.\n\n</details>\n\n## **Need specifications for your next project?**\n\nSend your drawings or glass schedule and our technical team will reply with a build-up recommendation, performance data, and production lead times.\n\n[Contact the technical team](https://amartaglass.com/contact)","title":"Architectural Glass Manufacturing Technology | AMG Glass","description":"AMG processes architectural glass on automated CNC cutting, high-convection tempering, and clean-room lamination lines, holding panels to a ±1.0 mm tolerance under SNI certification.","headings":[{"h1":"From jumbo sheet to installed glass, on automated lines"},{"h2":"How AMG processes architectural glass"},{"h3":"CNC Cutting & Edge Processing"},{"h3":"Thermal Toughening"},{"h3":"Lamination Assembly"},{"h3":"Insulating Glass Units (IGU)"},{"h2":"Every panel is tested before it ships"},{"h2":"Questions project teams ask about our processing"},{"h2":"Need specifications for your next project?"}],"keywords":["glass","lines","amg","panel","fragmentation","production","stress","optical","distortion","automated"]}